Specificpolymers.fr

SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product name
Poly (Diisopropyl Fumarate)
Product from R&D - For R&D use only Product Number
SP-9P-0-001
SPECIFIC POLYMERS Avenue de l'Europe - Cap Alpha F-34830 CLAPIERS - France
Telephone

Emergency Phone #

E-mail address
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Label elements
Pictogram
Not a dangerous substance according to CLP - GHS. This substance is not classified as dangerous according to Directive 67/548/EEC And CE 1272/2008. Caution - substance not yet tested completely Other hazards - none
3. COMPOSITION/INFORMATION ON INGREDIENTS
For the full text of the H-Statements mentioned in this Section, see Section 16. 4. FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed. Normal measures for preventive fire
protection.
Conditions for safe storage
Keep container tightly closed in a dry and well-ventilated place. Store in cool place.
Store under inert gas. Moisture sensitive. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protective equipment
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type
N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the
respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and
components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Hand protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without
touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after
use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Eye protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU).
Skin and body protection
Complete suit protecting against chemicals, The type of protective equipment must be selected according
to the concentration and amount of the dangerous substance at the specific workplace.
Hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the
end of workday.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Safety data
10. STABILITY AND REACTIVITY
Chemical stability
Stable under recommended storage conditions.
Conditions to avoid
no data available
Materials to avoid
Strong oxidizing agents
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Carbon oxides,
11. TOXICOLOGICAL INFORMATION
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
May be harmful if inhaled. May cause respiratory tract irritation. Ingestion
May be harmful if absorbed through skin. May cause skin irritation. Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Additional Information
RTECS: Not available
12. ECOLOGICAL INFORMATION
Toxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
PBT and vPvB assessment
Other adverse effects
13. DISPOSAL CONSIDERATIONS
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste
disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent
and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
14. TRANSPORT INFORMATION
ADR/RID
Not dangerous goods
IMDG
Not dangerous goods
IATA
Not dangerous goods
15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. 16. OTHER INFORMATION
Text of H-code(s) and R-phrase(s) mentioned in Section 3
Further information
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Specific Polymers, shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. The product is solely research and development purpose and not intended for food, drug or household purposes.

Source: http://www.specificpolymers.fr/medias/msds/SP-9P-0-001-MSDS.pdf?specsession=0031248308ea7a19fb2cc04ca2c34c1d

Death by medicine, part i 11/26/03

http://www.mercola.com/display/PrintPage.aspx?docid=30236&Print. [ Part I, Ref. I, Part II, Ref. II, Appendix ]By Gary Null PhD, Carolyn Dean MD ND, Martin Feldman MD, Debora Rasio MD,Dorothy Smith PhD ABSTRACT A definitive review and close reading of medical peer-review journals, and government health statisticsshows that American medicine frequently causes more harm than good. The numbe

pelitutkimus.fi

Pelitutkimuksen vuosikirja 2013. Tampereen yliopisto. http://www.pelitutkimus.fi/ Katsaus Kuvista toimijoiksi Digitaalisten pelien naishahmoesitykset ja niiden tutkimus Tiivistelmä Abstract Naisen paikkaa pelikulttuurissa on viime aikoina käsitelty niin peliteollisuuden From images to actors: on research of female representations in digital games kuin harrastaj

Copyright ©2010-2018 Medical Science