We bring to your notice a new website where you can buy propecia australia at a low cost with fast delivery to Australia.
Em637 project control
EM637 Project Control Syllabus
If you need to communicate directly with me, first use the above email address. I check this every other night. If I can easily answer your question via email, I will. If a spoken conversation is more appropriate, I can make time between noon and 1PM Monday through Friday, by appointment only. Please propose a date and time and phone #, and I’ll either call you or (if I have to) propose an alternate time.-
* If you have problems using Moodle, http://moodle.njit.edu has a "need help" section. If you still need help after having looked at these, contact the Helpdesk at 973-596-2900.
The purpose of this course is to give the student an understanding of Project Control, and to provide practical guidance and tools to enable the student to perform Project Control in the "real world". Project Control is an important component of Project Management, and the success of any project relies on the ability to control the project. Project Control focuses on project scope, schedule and budget, and how to determine when the project is "off-course" in these areas, and how to get back on track.
Learning material for this course was derived from: • The course text book • Project Management Institute knowledge • Independent Subject Matter Expertise • My practical experience working in project environments at Computer
Sciences Corp., First USA Bank, PECO Energy - an Exelon Corp., Cendant Mortgage and Lockheed Martin.
It is assumed that the student as already taken EM 636 - Project Management (an EM637 prerequisite), and is familiar with the following topics. General Project Management theory • Quality Control • Organizational cultures and structures • Motivational theory • Communications theory If the student has not taken EM636, or does not have practical experience running a project team or being a member of a project team, or closely observing either, then it is not recommended that this course be taken.
Some of the course material may refer back to material taught in Project Management. TOPIC AREAS The course is divided into 4 learning areas, or modules, as described below. Module 1 - Project Control Enablers
Enablers are tools, or processes, or business models, which provide project control “anchors” - support mechanisms to encourage project control. The student will learn about the following enablers, and their value in helping to keep a project under control. • Project Methodology, and organization acceptance of this • Project organizational charts - Who's Who • Defined roles for the project team • Project Stakeholders identified and on-board • Approved Business Requirements and Scope statements • Project Charters • Project financial buy-in, with recognized cost-benefit analysis • Approved Vendor contracts, with change control systems established • Project Management Information Systems • Project Charters • Design Approvals • Historical Data
The project plan provides a path to follow to a successful project completion. It also provides the measurement benchmark. Without a plan, there is no way to measure if the project is off-course. The student will learn about project plan components, and ways to develop usable project plans. Topic areas include: • Performance Requirements/Cost/Time/Scope (PCTS) trade-off analysis in
• Project plan components • Who should develop the project plan • Work Breakdown Structures • Work Packages • Risk Analysis in planning • Cost Estimates
Project time control is about knowing when you need to be done with each component of the project. The project schedule is the means to measure success against time. The student will learn the steps and techniques required to develop good working schedules. The scheduling tool of choice for the course will be Microsoft Project. Areas covered include: • The schedule development process
• Network development techniques • Fast Tracking, Schedule Crashing, & Resource Leveling
Once a project has the right enablers in place, and a good project plan and schedule in place, and that project is “in flight”, the real work of project control begins. The student will learn about tools, processes and techniques which provide for the timely detection of whether the project is on/off course, and how to get that project back on course. Topic areas include: • Performance Requirements/Cost/Time/Scope (PCTS) trade-off analysis in
• Risk analysis in project control • Earned Value Analysis and other financial tracking methods • Change Approval Processes • Work Authorization Systems
Assignments and Grading Assignments will include (but not be limited to) the following: • Reading assignments from the course book • Study of course material provided as slides or documents posted to Moodle • Responding to posted discussion questions on Moodle • Practical application of techniques taught in the class, such as development
of a project schedule, or development of other project control tools.
Your performance will be assessed as follows: A Final Exam (no midterm) – 33% Class Participation (via Moodle) – 33% Completion of Assignments - 33% Work submitted late will be assessed a grading penalty. NOTE - this course is NOT a "casual - take at your own pace" Moodle course. There are weekly reading/writing assignments, and weekly class participation in Moodle "Discussion Forums" is mandatory. The Class Policy outlined below discusses due dates. Except for a few of the writing assignments, the Work in this course will take you about 3-4 hrs per week on average. Course Materials Project Planning, Scheduling, and Control - 5th Edition, James P. Lewis, ISBN – 978-0-07-174652-6, Publisher: McGraw Hill, Copyright: 2011 Additional Reference Material This course uses Project Management Institute (PMI) material as reference material in many places. While not required for the class, it would be valuable for the student to have PMI’s “Guide to the Project Management Body of Knowledge” (ISBN 1880410230 as an additional information source. The book is available via PMI’s web-site for $35.95.
This course will also reference the course book from Project Management – EM636: “Project Management – A Systems Approach to Planning, Scheduling & Controlling”, by Harold Kerzner (ISBN – 0-471-28835-7). The student will have to create a project schedule as part of the course assignments. The preferred tool for this will be Microsoft Project. If the student has access to other scheduling software that supports similar functionality to Microsoft Project, this will be an acceptable alternative, as long as the software can produce either paper output (which must be mailed to me), or output that can be read by Microsoft Project. NJIT has Microsoft Project available as a download for students. There are certain restrictions. You will need an active UCID, and an active password that works for the on campus computers (the PW that works for the Registrar On-Line and Highlander will NOT work). Go to the following link to get started: Microsoft Project 2010 (not the Professional version). You will not need Microsoft Project until week 10, but I strongly urge you to download the program early in the class and get it working. Course Schedule and assignments – will be provided on Moodle by the first week of the course.
Lista de productos para Biología Molecular – Maxim Biotech. Lista de Referencia Por favor comuníquese con nosotros para solicitar más información. Algunos productos pueden estar discontinuados Phage Display cDNA Library Category New CatNo Description Phage Display cDNA Library, Human Adipose Tissue, 10 RxnsPhage Display cDNA Library, Human Brain Tissue, 10 RxnsPhage Display
HEALTH AND SAFETY DATA SHEET BRUSH MATE FLUID (including VAPOUR MATE impregnated pads) General Note: Brush Mate storage systems have proved to be very safe in normal use. Only small quantities of fluid are involved and provided that sensible practices are followed it is not visualised that any problems will occur. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY PRODU