SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE AND SUPPLIER Product name: ALBENDAZOLE Sheep Product code: Recommended use:
For the control of albendazole sensitive roundworms, tapeworms, lungworms and adult fluke in sheep.
Company details: Address: Telephone number:
Phone: +64 9 980 1600 Fax: +64 9 980 1601
Emergency telephone
National Poisons Centre: 0800 764 766 (0800 POISON) Fire Service, Ambulance: Dial 111
Date of preparation: SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS Chemical characterization: Product components: Proportion SECTION 3: HAZARDS IDENTIFICATION Hazard classifications: Priority and secondary identifiers: Risk and safety phrases:
6.3B May cause mild skin irritation. Avoid skin contact. 6.5B Repeated exposure may cause skin allergy. Avoid skin contact.
6.6B Albendazole possibly may cause damage to genetic material.
6.8A Albendazole may affect development and/or reproduction. Handle with care.
6.9B Albendazole possibly may cause organ damage from repeated
oral exposure at high doses. Handle with care.
SECTION 4: FIRST AID MEASURES Necessary first aid For advice contact the National Poisons Centre on 0800 measures: POISON (0800 764 766), or a doctor immediately.
Ingestion: If swallowed seek medical attention. Do NOT induce
Eye Contact: If splashed in eyes wash out immediately with water. Skin Contact: If skin or hair contact occurs remove contaminated
clothing and flush skin and hair with running water. Inhalation: Remove to fresh air.
Workplace facilities: Required instructions:
Observe good work practices and avoid skin contact. Wash hands and exposed skin before meals and after use. Do not eat or drink
while using. Launder protective clothing separately from other
Notes for medical personnel:
Apply symptomatic therapy. Note the nature of the product
(possible mutagen, reproductive/developmental toxin)
SAFETY DATA SHEET SECTION 5: FIRE FIGHTING MEASURES Type of hazard:
Non flammable, Non combustible, Non explosive
Fire hazard properties:
Albendazole Sheep is not classified as flammable, and will not
support combustion. Hazardous fumes when heated to
Regulatory requirements: Extinguishing media and
Treat the fire as for the other materials present. Do not allow water
methods: Hazchem code: Recommended protective
When fighting a major fire wear full protective clothing including
clothing: SECTION 6: ACCIDENTAL RELEASE MEASURES Emergency procedures:
Wear suitable protective clothing. Restrict access to contaminated area. Contain the spill and prevent further dispersion. Retrieve
intact containers from site. Place damaged containers into containment devices. Absorb spills with inert material and place in
waste containers. Wash the area with water and absorb with further
inert material. Collect spilled material and place in sealable
containers for subsequent disposal. Avoid contamination of water courses or sewers. Dispose of waste safely
SECTION 7: HANDLING AND STORAGE Precautions for safe
Apply with well-maintained and calibrated equipment. Handle with
handling: Regulatory requirements: Handling practices: Approved handlers: Conditions for safe storage:
Store in a cool place with lid on. Keep out of reach of children.
Store site requirements:
This substance is subject to a requirement for an emergency management plan and secondary containment, whenever it is held
in quantities of 1000L or more. See Hazardous Substances
(Emergency management) regulations 25 to 42.
Packaging:
Packaging Schedule 3 for quantities >1L (Hazardous Substances
Packaging Regulations 2001. UN Packing Group III.
SECTION 8: EXPOSURE CONTROL/PERSONAL PROTECTION Workplace exposure standards: Application in the workplace: Prevent exposure by using engineering controls, personal protective
equipment and work practices that prevent skin contact.
Exposure standards outside the workplace: Engineering controls:
Ensure that ventilation maintains dust levels below WES,
Personal protection:
Clothing should consist of overalls with long sleeves and impervious
References: SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES SAFETY DATA SHEET Specify product data:
Appearance: White to off-white suspension
Specific gravity: ∼1.0 g/ mL Boiling Point: ca. 100° C
Vapour Pressure: NA Solubility in Water: Albendazole is insoluble
Required specifications: Further specifications: Specific advice: SECTION 10: STABILITY AND REACTIVITY Stability of the substance:
Stable under normal conditions of use and storage.
Conditions to avoid: Material to avoid: Hazardous decomposition
No hazardous products are expected, except when heated to
products: Hazardous polymerization:
Components are not expected to form hazardous polymers.
Specific data: SECTION 11: TOXICOLOGICAL INFORMATION Data and interpretation:
Albendazole Sheep: May cause mild skin irritation. Repeated
exposure may cause skin allergy. Danger of serious damage to health by prolonged exposure if swallowed. Albendazole possibly
may cause damage to genetic material. Albendazole may affect
development and/or reproduction. Albendazole possibly may cause
organ damage from repeated oral exposure at high doses.
Summaries data:
Albendazole: Benzimidazoles prevent tubulin polymerisation or spindle movement and their administration can result in aneuploidy.
They are weak mutagens. Albendazole has low to moderate acute
oral toxicity [LD50 (oral, rabbit) 500-1250mg/kg; LD50 (oral, rat)
1320-2400mg/kg; LD50 (oral, mice) >3000mg/kg]. Identified as a
potential skin sensitiser by a positive result in a guinea pig
maximisation test. In repeated dose studies toxic effects included
reduced weight gain, reduced erythrocyte and leucocyte counts, decreased testes and uterine weights, slight increases in relative
liver and kidney weights, and sternal bone marrow hypocellularity
(lowest NOAEL 5mg/kg/day). Teratogenicity (visceral, craniofacial and bone defects) has been demonstrated in animal studies (lowest
SECTION 12: ENVIRONMENTAL INFORMATION Potential environmental interactions: Data organisation :
Albendazole: Albendazole may be toxic to terrestrial vertebrates based on LD50 data [LD50 (oral, rabbit) 500-1250mg/kg]. Not toxic
to fish or honey bees. The potential for bioaccumulation is low and
benzimidazoles are degraded in soil and probably also in water.
Environmental risk and safety phrases: SECTION 13: DISPOSAL CONSIDERATIONS Disposal information :
Preferably dispose of the product by use. Otherwise dispose of
product and packaging at an approved landfill or other approved
SAFETY DATA SHEET
facility. Burn empty container in an appropriate incinerator, if
circumstances such as wind direction permit. Otherwise crush or
puncture and bury in a suitable landfill. Do NOT use container for
SECTION 14: TRANSPORT INFORMATION Relevant information:
Not classified as dangerous for rail, road, air or sea transport.
The maximum quantity per package of this substance allowed for
Other requirements: SECTION 15: REGULATORY INFORMATION Regulatory status:
Registered pursuant to the ACVM Act 1997, No. A6520 See www.nzfsa.govt.nz/acvm for registration conditions
Approved pursuant to the HSNO Act, Approval Code HSR002240 See www.ermanz.govt.nz for approval conditions
SDS is required for quantities greater than or equal to 0.1L
HSNO and ACVM controls: List exposure limits: SECTION 16: OTHER INFORMATION Additional information:
For product information visit the Merial website www.merial.co.nz While the information set forth is believed to be accurate as of the
date hereof, MERIAL NZ LTD. makes no warranty with respect hereto and disclaims all liability from reliance thereon.
BASE 8 is a kit manufactured by Optima Ovest to specifically allow pharmacists to easily prepare suspensions of Omeprazole and Lansoprazole. BASE 8 is a pleasant tasting, sweetened, raspberry and marshmallow flavoured suspending base which contains only 7.3mg/mL of Na+ compared with Sodium Bicarbonate 8.4% solution which contains 23mg/mL of Na+. The excellent taste of BASE 8 will increase the