We fetch to your attention a new website where you can buy priligy australia at a low price with fast delivery to Australia.

Tiamu-sol ump msds f

(Tiamulin hydrogen fumarate 98%)
Validity of MSDS: from 07/03/08

Statement of Hazardous Nature:
Not classified as hazardous according to the criteria of Worksafe Australia
1. Identification

Product Name:
Chemical Names:
Manufacturer's Code:
UN Number:
CAS Number:
Dangerous Goods Class:
Packaging Group:
Subsidiary Risk:
Hazchem Code:
Poisons Schedule:
Antibacterial medication for pigs and chickens
2. Physical Description/Properties

UN Number:
DG Class and Subsidiary Risk:
Hazchem Code:
Poisons Schedule Number:
Antibacterial medication for pigs and chickens Appearance:
Boiling Point/Melting Point:
Vapour Pressure:
Specific Gravity:
Flammability Limits:
Not flammable (dust may cause explosion) Solubility:
Other Properties:
Percent volatile:
Bulk density:

3. Information on Composition and Ingredients


4. Hazard Identification
Health Effects:

Skin erythema and other hypersensitivity reactions may occur in pigs on rare occasions following treatment. If this occurs then discontinue use until the condition subsides, then resume use.

Moderately toxic. Tests on mice using pure Tiamulin hydrogen fumarate indicate moderate toxicity following a single dose Moderately toxic. May cause skin irritation. Prolonged or repeated overexposure may cause sensitisation

Moderately toxic. May cause irritation of the respiratory tract. Prolonged or repeated overexposure may cause sensitisation.

Mild changes in the liver and reversible ECG changes were found after repeated high doses of Tiamulin fumarate to experimental animals. ce
May cause stomach distress, nausea or vomiting. space
Target organs:

Signs and symptoms:
Symptoms may include redness, oedema, drying, defatting and cracking of the skin. Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting.
5. First Aid measures

Wash mouth with plenty of water. Take patient to medical center or physician. If more than 15 minutes from hospital, induce vomiting. Never give anything by mouth to an unconscious person. Immediately flush with plenty of water for at least 15 minutes. Make sure to flush under the eyelids. Consult a physician for definitive treatment. Remove contaminated clothing and wash skin with plenty of soap and water. Continue flushing with water for several minutes. Consult a physician if irritation continues or if a large skin area is affected.
5. First Aid measures continued


Remove to fresh air. Remove contaminated clothing and loosen remaining clothing. Keep warm and at rest. If not breathing, give artificial respiration. If breathing difficult, give oxygen. Seek medical advice if symptoms persist or if unconscious.
Slight inhalation:
Remove person from contaminated area to fresh air. Apply artificial respiration if needed
Hazardous inhalation

Slight ingestion
Not for human use. If swallowed seek medical assistance.
Hazardous ingestion

Advice to Doctor

6. Precautions for Use:

Exposure Standards:

Engineering Controls:

Ensure adequate ventilation. Keep containers closed when not in use.
Personal Protection:

Use good industrial hygiene. Avoid skin and eye contact. Prevent dispersion of dust. If inhalation risk occurs, wear organic vapour respirator. Wear protective clothing when opening container and handling such as cotton overalls buttoned to neck, elbow-length PVC gloves, washable hat, goggles, disposable dust mask. Always wash hands and face after use, especially before eating, drinking or smoking.

7. Handling and Storage

Storage and Transport:

Store under cool, dry conditions (<30 °C). Protect from light. Keep container tightly closed. Store away from direct sunlight. Isolate from incompatible materials. Keep away from food. Avoid prolonged or repeated skin contact. Avoid breathing vapours. Storage Keep container dry. Keep in a cool place. Keep container tightly closed. Keep in a cool, well-ventilated place. Combustible materials should be stored away from extreme heat and away from strong oxidizing agents. 8. Accidental release measures

Spills and Disposal:
Sweep up spills and dispose of at licensed landfill site. Wear protective equipment to prevent skin and eye contact. Do not burn container.
Methods for containment:
Prevent entry into waterways, sewers, basements or confined areas.

Methods for cleaning up:

Before attempting clean up, refer to hazard data given above. Use broom or dry vacuum to collect material for proper disposal without raising dust. Rinse area with water. Prevent large spills from entering sewers or waterways. Contact emergency services and supplier for advice.
Use good industrial hygiene practices in handling this material. Avoid breathing dusts from this material.
9. Fire fighting Measures

Fire/Explosion Hazard:

Extinguishing Media:

Hazardous Decomposition

May include and are not limited to: Oxides of carbon. Oxides of nitrogen. Oxides of sulphur.
Small Fire:
Use DRY chemicals, CO2, water spray or foam.
Large Fire:
Use water spray, fog or foam. DO NOT use water jet.
Special fire Fighting Procedures:
Recommend pressure-demand, self-contained breathing apparatus (SCBA). Wear full protective equipment and isolate area.
No specific information is available in our database regarding the flammability of this product in presence of various materials. Risks of explosion Air-borne particles may present dust explosion hazard. 10. Stability and Reactivity


No specific information is available in our database regarding the corrosivity of this product in the presence of various materials. None for handling. Monensin, salinomycin, semduramicin, lasalocid and narasin re incompatible with tiamulin in vivo. Avoid cross contamination of feeds with these drugs. Avoid moisture and high humidity;
avoid excessive temperature storage; prevent other than label uses.
Incompatible materials:

Possibility of hazardous reactions: Hazardous polymerisation does not occur.
11. Exposure Controls / Personal Protection

Exposure Standards:
None allocated other than a TWA 10mg/M3 air for nuisance dusts
Engineering Controls:

No special conditions but use in a well ventilated area
Engineering controls

Personal Protection

Hand protection:
Rubber gloves. Confirm with a reputable supplier first.
Skin and body protection:

Respiratory protection:
Use approved dust mask or gas respirators with dust filters.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. When using do not eat or drink. Wash hands before breaks and immediately after handling the product.

12. Toxicological Information

Routes of entry:
Chronic effects on humans Carcinogenic Effects: Not carcinogenic Mutagenic Effects:
There is no known effect from chronic exposure to this product.
Repeated or prolonged exposure is not known to aggravate medical condition.
NO carcinogenic effect.
Acute effects on humans Product dust may cause sneezing and/or irritation of mucus
membranes; skin irritation and/or antibiotic
sensitivities in some individuals.
Effects of acute exposure

Contact can cause mild temporary irritation due to physical abrasion.
Skin Dust or powder may irritate the skin.
Inhalation Dusts of this product may cause irritation of the nose, throat, and respiratory
Ingestion May cause stomach distress, nausea or vomiting.
Sensitisation Non-hazardous by Worksafe criteria.

Chronic effects
Non-hazardous by Worksafe criteria.
Carcinogenicity Non-hazardous by Worksafe criteria.
Mutagenicity Non-hazardous by Worksafe criteria.
Reproductive effects Non-hazardous by Worksafe criteria.
Teratogenicity Non-hazardous by Worksafe criteria.
Ecotoxicity effects This material is not expected to be harmful to aquatic life.
13. Ecological Information

Do not allow product to enter drinking water supplies, wastewater or soil!

14. Disposal Considerations

Single rinse containers before disposal, and add rinsings to medicated water. Do not dispose
of undiluted chemicals on site. Break, crush or puncture and bury empty containers in a local
authority landfill. If no landfill is available, bury the containers below 500mm in a disposal pit
specifically marked and set up for this purpose, clear of waterways, vegetation and roots.
Empty containers and product should not be burned.
15. Transport Information

There are no special transport requirements.
16. Other Information

This Material Safety data Sheet (MSDS) has been prepared according to the Guidelines of
Worksafe Australia and the information is believed to be true and correct at the time of
FITNESS FOR A PARTICULAR PURPOSE) and is valid for 1 year.

Contact Points:
If you require information on the product contact
If you are unable to contact Dox-al Australia, Call the Australian Poisons Centre on
131 126 (Australia)


This Material Safety data Sheet (MSDS) has been prepared according to the Guidelines of Worksafe
Australia and the information is believed to be true and correct at the time of publication and valid for 1
year. The information has been compiled from sources we believe to be reliable. It is offered as a guide
only for safe handling procedures and for safe use and storage. Dox-al Australia urges users of the
product to read the MSDS carefully and note all precautions when using this substance. Dust emitted
during handling of any chemical substance should be considered dangerous. To promote safe handling,
the user should notify its employees, customers and anyone who may come in contact with the material
or who may use the material either as a pure substance or in premix or stock feed of any health
warnings or risks associated with its use and contained in this MSDS. This safety data sheet is not
intended to be a substitute for consultation with appropriately trained personnel. As use of the product
is outside the control of the manufacturer, the user assumes all responsibility for safe use and handling
of the product. It is the responsibility of the user to ensure safe working conditions and that the product
is suitable for the application for which it is purchased and to be used.

Source: http://www.doxal.com.au/docs/pdf/Tiamu-sol-UMP-MSDS-F_010909.pdf

19001_manual prova titulos.indd

PROVA AO TÍTULO DE ESPECIALISTA EM ACUPUNTURA- TEAC/2009 01- Em acupuntura, o resultado do tratamento em muito depende da correta combinação de pontos locais e pontos à distância. Assinale abaixo qual o conjunto de pontos é mais indicado no tratamento das disfunções de acordo com o trajeto dos meridianos. a) Para a região frontal- Pontos à distância: TA 5, VB41; locais: VB8, VB6

Copyright © 2010-2014 Medical Science